Index
Update VistA devices for Linux
From step 97 on Windows
Configuring FOIA VistA from step 32
To create the PlugAndPlay FOIA VistA install for Linux, I started with the CACHE.DAT from the CD set I ordered dated Sept, 2004. I followed the instructions for installing on windows, and once it was checked out, I shutdown Caché and copied the CACHE.DAT to my Linux platform (NewTower.rwitkop.com). I will have the modifications made to configure VistA on Linux in the
next page
On NewTower, running a licensed version of Caché (the license will expire next month), I installed the CACHE.DAT in /home/CacheDB/VistA, then changed the OS parameters for Linux instead of Windows. Prior to step 32 (where this page begins, I converted the CACHE.DAT from version 4 to version 5, then converted teh CACHE.DAT from a 2k block dataset to an 8k block dataset (there was a 70 Mb reductions if the size of the CACHE.DAT. The 8k block is not only smaller, but it performs better.
In the log that follows, my input is in BOLD.
Following is the log for configuring VistA on Caché on Windows:
USER>
USER>ZN "VISTA"
VISTA>DO ^ZTMGRSET
ZTMGRSET Version 8.0 **34,36,69,94,121,127,136,191,275**
HELLO! I exist to assist you in correctly initializing the current account.
THIS MAY NOT BE THE MANAGER UCI.
I think it is VISTA,VISTA. Should I continue anyway? N//Y
I think you are using OpenM-NT
Which MUMPS system should I install?
1 = VAX DSM(V6), VAX DSM(V7)
2 = MSM-PC/PLUS, MSM for NT or UNIX
3 = OpenM for NT, Cache/NT, Cache/VMS
4 = Datatree, DTM-PC, DT-MAX
5 = MVX,ISM VAX
6 = ISM (UNIX, Open VMS)
7 = GT.M (VMS)
8 = GT.M (Unix)
System: 3
I will now rename a group of routines specific to your operating system.
Routine: ZOSVONT Loaded, Saved as %ZOSV
Routine:
Routine: ZIS4ONT Loaded, Saved as %ZIS4
Routine: ZISFONT Loaded, Saved as %ZISF
Routine: ZISHONT Loaded, Saved as %ZISH
Routine: XUCIONT Loaded, Saved as %XUCI
Routine:
Routine: ZISTCPS Loaded, Saved as %ZISTCPS
Routine: ZOSVKRO Loaded, Saved as %ZOSVKR
Routine: ZOSVKSOE Loaded, Saved as %ZOSVKSE
Routine: ZOSVKSOS Loaded, Saved as %ZOSVKSS
Routine: ZOSVKSD Loaded, Saved as %ZOSVKSD
NAME OF MANAGER'S NAMESPACE: VISTA//
PRODUCTION (SIGN-ON) NAMESPACE: VISTA//
NAME OF THIS CONFIGURATION: VISTA//
ALL SET UP
Now to load routines common to all systems.
Routine: ZTLOAD Loaded, Saved as %ZTLOAD
Routine: ZTLOAD1 Loaded, Saved as %ZTLOAD1
Routine: ZTLOAD2 Loaded, Saved as %ZTLOAD2
Routine: ZTLOAD3 Loaded, Saved as %ZTLOAD3
Routine: ZTLOAD4 Loaded, Saved as %ZTLOAD4
Routine: ZTLOAD5 Loaded, Saved as %ZTLOAD5
Routine: ZTLOAD6 Loaded, Saved as %ZTLOAD6
Routine: ZTLOAD7 Loaded, Saved as %ZTLOAD7
Routine: ZTM Loaded, Saved as %ZTM
Routine: ZTM0 Loaded, Saved as %ZTM0
Routine: ZTM1 Loaded, Saved as %ZTM1
Routine: ZTM2 Loaded, Saved as %ZTM2
Routine: ZTM3 Loaded, Saved as %ZTM3
Routine: ZTM4 Loaded, Saved as %ZTM4
Routine: ZTM5 Loaded, Saved as %ZTM5
Routine: ZTM6 Loaded, Saved as %ZTM6
Routine: ZTMS Loaded, Saved as %ZTMS
Routine: ZTMS0 Loaded, Saved as %ZTMS0
Routine: ZTMS1 Loaded, Saved as %ZTMS1
Routine: ZTMS2 Loaded, Saved as %ZTMS2
Routine: ZTMS3 Loaded, Saved as %ZTMS3
Routine: ZTMS4 Loaded, Saved as %ZTMS4
Routine: ZTMS5 Loaded, Saved as %ZTMS5
Routine: ZTMS7 Loaded, Saved as %ZTMS7
Routine: ZTMSH Loaded, Saved as %ZTMSH
Routine: ZTER Loaded, Saved as %ZTER
Routine: ZTER1 Loaded, Saved as %ZTER1
Routine: ZIS Loaded, Saved as %ZIS
Routine: ZIS1 Loaded, Saved as %ZIS1
Routine: ZIS2 Loaded, Saved as %ZIS2
Routine: ZIS3 Loaded, Saved as %ZIS3
Routine: ZIS5 Loaded, Saved as %ZIS5
Routine: ZIS6 Loaded, Saved as %ZIS6
Routine: ZIS7 Loaded, Saved as %ZIS7
Routine: ZISC Loaded, Saved as %ZISC
Routine: ZISP Loaded, Saved as %ZISP
Routine: ZISS Loaded, Saved as %ZISS
Routine: ZISS1 Loaded, Saved as %ZISS1
Routine: ZISS2 Loaded, Saved as %ZISS2
Routine: ZISTCP Loaded, Saved as %ZISTCP
Routine: ZISUTL Loaded, Saved as %ZISUTL
Routine: ZTPP Loaded, Saved as %ZTPP
Routine: ZTP1 Loaded, Saved as %ZTP1
Routine: ZTPTCH Loaded, Saved as %ZTPTCH
Routine: ZTRDEL Loaded, Saved as %ZTRDEL
Routine: ZTMOVE Loaded, Saved as %ZTMOVE
Want to rename the FileMan routines: No//Y
Routine: DIDT Loaded, Saved as %DT
Routine: DIDTC Loaded, Saved as %DTC
Routine: DIRCR Loaded, Saved as %RCR
Installing ^%Z editor
Setting ^%ZIS('C')
Now, I will check your % globals...........
ALL DONE
VISTA>
VISTA>
VISTA>
VISTA>
VISTA>
VISTA>W "STEP 36"
STEP 36
VISTA>DO ^DINIT
VA FileMan V.22.0
Initialize VA FileMan now? NO//Y
SITE NAME: TECHNICAL INTEGRATION SERVICE// Plug and Play VistA
SITE NUMBER: 50// 6969..........................
Now loading MUMPS Operating System File....
Now loading DIALOG and LANGUAGE Files..........................................................
TYPE OF MUMPS SYSTEM YOU ARE USING: CACHE/OpenM//
Now loading other FileMan files--please wait.................................................................................................................................................................................................................
..........
The following files have been installed:
.11 INDEX
.2 DESTINATION
.31 KEY
.4 PRINT TEMPLATE
.401 SORT TEMPLATE
.402 INPUT TEMPLATE
.403 FORM
.404 BLOCK
.44 FOREIGN FORMAT
.46 IMPORT TEMPLATE
.5 FUNCTION
.6 DD AUDIT
.7 MUMPS OPERATING SYSTEM
.81 DATA TYPE
.83 COMPILED ROUTINE
.84 DIALOG
.85 LANGUAGE
1 FILE
1.1 AUDIT
1.11 ARCHIVAL ACTIVITY
1.12 FILEGRAM HISTORY
1.13 FILEGRAM ERROR LOG
1.2 ALTERNATE EDITOR
1.521 SQLI_SCHEMA
1.52101 SQLI_KEY_WORD
1.5211 SQLI_DATA_TYPE
1.5212 SQLI_DOMAIN
1.5213 SQLI_KEY_FORMAT
1.5214 SQLI_OUTPUT_FORMAT
1.5215 SQLI_TABLE
1.5216 SQLI_TABLE_ELEMENT
1.5217 SQLI_COLUMN
1.5218 SQLI_PRIMARY_KEY
1.5219 SQLI_FOREIGN_KEY
1.52191 SQLI_ERROR_TEXT
1.52192 SQLI_ERROR_LOG
Re-indexing entries in the DIALOG file.....................
Compiling all forms ...
DICATT (#.001)
DIPTED (#.1001)
DIKC EDIT (#.1101)
DIKC EDIT UI (#.1102)
DIKK EDIT (#.3101)
DIBTED (#.40001)
DIETED (#.40101)
DIEDIT (#.40201)
DDGF BLOCK EDIT (#.40301)
DDGF PAGE ADD (#.40302)
DDGF PAGE EDIT (#.40303)
DDGF PAGE SELECT (#.40304)
DDGF FORM EDIT (#.40305)
DDGF HEADER BLOCK EDIT (#.40306)
DDGF FIELD ADD (#.40401)
DDGF FIELD CAPTION ONLY (#.40402)
DDGF FIELD DD (#.40403)
DDGF FIELD FORM ONLY (#.40404)
DDGF FIELD COMPUTED (#.40405)
DDGF BLOCK ADD (#.40406)
DDGF BLOCK DELETE (#.40407)
DDGF HEADER BLOCK SELECT (#.40408)
DDXP FF FORM1 (#.441)
DDMP SPECIFY IMPORT (#.461)
XPD EDIT BUILD (#1)
XUEDIT CHARACTERISTICS (#2)
XUEXISTING USER (#3)
XUDEVICE MT (#4)
XUDEVICE SDP (#5)
XUDEVICE SPL (#6)
XUDEVICE HFS (#7)
XUDEVICE CHAN (#8)
XU OPTION SCHEDULE (#9)
XUSERDEACT (#10)
XUTM UCI ASSOC (#11)
XUSITEPARM (#12)
XUAUDIT (#13)
XUREACT USER (#14)
PRSA TD EDIT (#15)
PRSA OT REQ (#16)
PRSA TD DISP (#17)
PRSA TL EDIT (#18)
PRSA TL DISP (#19)
PRSA LV REQ (#20)
PRSA ED REQ (#21)
PRSA VC POST (#22)
PRSA PM POST (#23)
PRSA TD TL (#24)
PRSA TP POST1 (#25)
PRSA TE EDIT (#26)
PRSA FEE POST (#27)
NURA-I-SERVICE (#28)
XU-PERSON CLASS (#29)
XUNEW USER (#30)
SPNLPFM1 (#31)
SPNFFRM1 (#32)
SPNFFRM2 (#33)
SPNLPFM2 (#34)
XPD EDIT MP (#35)
XPD EDIT GP (#36)
PRCHQ1 (#37)
PRCHQ2 (#38)
PRCHQ3 (#39)
PRCHQ4 (#40)
PRCHQ5 (#41)
SPNLP FUN MES (#42)
SPNLP FIM FM1 (#43)
SPNLP CHART FM1 (#44)
SPNLP MS FM1 (#45)
SPNE ENTER/EDIT SYNONYM (#46)
LREPI (#47)
ENPR MS (#48)
ENPR ALL (#49)
ENPR PRELIM (#50)
ENPR AE (#51)
ENPR CO (#52)
ENPR CHG (#53)
ABSV ADD/EDIT MASTER (#54)
XQEDTOPT (#55)
XU-INST-EDIT (#56)
LREPIPROT (#57)
XUTMKE ADD (#58)
WV PROC-FORM-1 (#59)
WV NOTIF-FORM-1 (#60)
WV PATIENT-FORM-1 (#61)
WV NOTIF-FORM-2 (#62)
WV PROC-FORM-2-COLP (#63)
WV NOTIFPURPOSE-FORM-1 (#64)
WV SITE PARAMS-FORM-1 (#65)
WV REFUSED PROCEDURE-ENTRY (#66)
WV PROC-FORM-LAB (#67)
XDR RESFILE FORM (#68)
HL SITE PARAMETERS (#69)
PSB PRN EFFECTIVENESS (#70)
PSB MED LOG EDIT (#71)
PSBO DL (#72)
PSBO WA (#73)
PSBO ML (#74)
PSBO MM (#75)
PSBO PE (#76)
PSB MISSING DOSE REQUEST (#77)
PSBO MH (#78)
PSBO MV (#79)
PSB MISSING DOSE FOLLOWUP (#80)
PSBO BL (#81)
PSBO MD (#82)
PSB NEW UD ENTRY (#83)
PSB NEW IV ENTRY (#84)
HL7 APP (#85)
HL7 LOGICAL LINK (#86)
HL7 INTERFACE (#87)
SPNLP ASIA MES (#88)
PSB MED LOG EDIT IV (#89)
SPNLP FAM FM1 (#90)
SPNLP DIENER FM1 (#91)
SPNLP DUSOI FM1 (#92)
XU-CLINICAL TRAINEE (#93)
XUSSPKI (#94)
INSTITUTION EDIT (#95)
PRSA LD POST (#96)
XUDEVICE LPD (#97)
XUDEVICE TRM (#98)
KMPD PARAMETERS EDIT (#99)
LREPI9 (#100)
INITIALIZATION COMPLETED IN 5 SECONDS.
VISTA>DO ^%RO
Routine output (please use %ROMF for object code output)
Routine(s): %ZOSV
Routine(s):
Description: ZOSV TO BE MODIFIED
Output routines to
Device: C:\CACHEDB\ro\pcZOSV.RO Parameters: "WNS"=>
Printer Format? No => No
%ZOSV.INT
VISTA>DO ^%RO
Routine output (please use %ROMF for object code output)
Routine(s): XWBTCPC
Routine(s):
Description: XWBTCPC to be modified
Output routines to
Device: c:\cachedb\ro\ZWBTCPC.RO Parameters: "WNS"=>
Printer Format? No => No
XWBTCPC.INT
VISTA>do ^%RI
Input routines from Sequential
Device: c:\cachedb\ro\ZWBTCPC.RO Parameters: "RS"=>
File written by Cache for Windows NT using %RO on 05 Apr 2005 7:10 AM
with extension INT and with description:
XWBTCPC to be modified
( All Select Enter List Quit )
Routine Input Option: All Routines
If a selected routine has the same name as one already on file,
shall it replace the one on file? No => Yes
Recompile? Yes => Yes
Display Syntax Errors? Yes => Yes
^ indicates routines which will replace those now on file.
@ indicates routines which have been [re]compiled.
- indicates routines which have not been filed.
XWBTCPC.INT^@
1 routine processed.
VISTA>D GETENV^%ZOSV W Y
VISTA^VISTA^RWITKOP-DELL2^VISTA:CACHE
VISTA>DO Q^DI
VA FileMan 22.0
Select OPTION: 1 ENTER OR EDIT FILE ENTRIES
INPUT TO WHAT FILE: TASKMAN SITE PARAMETERS// DOMAIN
(3 entries)
EDIT WHICH FIELD: ALL//
Select DOMAIN NAME: VISTA.MYDOMAIN.COM
Are you adding 'VISTA.MYDOMAIN.COM' as a new DOMAIN (the 4TH)? No// Y (Yes)
FLAGS: ^
Select DOMAIN NAME:
Select OPTION:
VISTA>DO CHRISTEN^XMUDCHR
* * * * WARNING * * * *
You are about to change the domain name of this facility
in the MailMan Site Parameters file.
Currently, this facility is named: PLATINUM.VISTA.MED.VA.GOV
You must be extremely sure before you proceed!
Are you sure you want to change the name of this facility? NO// YES
Select DOMAIN NAME: PLATINUM.VISTA.MED.VA.GOV// VISTA.MYDOMAIN.COM
The domain name for this facility is now: VISTA.MYDOMAIN.COM
PARENT: FORUM.VA.GOV// PLATINUM.VISTA.MED.VA.GOV
TIME ZONE: MDT// PDT PACIFIC DAYLIGHT
PLATINUM.VISTA.MED.VA.GOV has been initialized as your 'parent' domain.
(Forum is usually the parent domain, unless this is a subordinate domain.)
You may edit the MailMan Site Parameter file to change your parent domain.
We will not initialize your transmission scripts.
Use the 'Subroutine editor' option under network management menu to add your
site passwords to the MINIENGINE script, and the 'Edit a script' option
to edit any domain scripts that you choose to.
VISTA>
VISTA>DO Q^DI
VA FileMan 22.0
Select OPTION: 5 INQUIRE TO FILE ENTRIES
OUTPUT FROM WHAT FILE: DOMAIN//
Select DOMAIN NAME: VISTA.MYDOMAIN.COM
ANOTHER ONE:
STANDARD CAPTIONED OUTPUT? Yes// N (No)
FIRST PRINT FIELD: NUMBER
THEN PRINT FIELD:
Heading (S/C): DOMAIN LIST//
DEVICE: CONSOLE Right Margin: 80//
DOMAIN LIST APR 5,2005 07:28 PAGE 1
NUMBER
--------------------------------------------------------------------------------
5
Select OPTION:
VISTA>
VISTA>SET $PIECE(^XTV(8989.3,1,0),"^")=5
VISTA>SET $PIECE(^XWB(8994.1,1,0),"^")=5
VISTA>W "STEP 45",!
STEP 45
VISTA>DO Q^DI
VA FileMan 22.0
Select OPTION: UTILITY FUNCTIONS
Select UTILITY OPTION: RE-INDEX FILE
MODIFY WHAT FILE: DOMAIN// 8989.3 KERNEL SYSTEM PARAMETERS
(1 entry)
THERE ARE 13 INDICES WITHIN THIS FILE
DO YOU WISH TO RE-CROSS-REFERENCE ONE PARTICULAR INDEX? No// (No)
OK, ARE YOU SURE YOU WANT TO KILL OFF THE EXISTING 13 INDICES? No// YES (Yes)
DO YOU THEN WANT TO 'RE-CROSS-REFERENCE'? Yes// (Yes)
...SORRY, LET ME THINK ABOUT THAT A MOMENT...
FILE WILL NOW BE 'RE-CROSS-REFERENCED'................
Select UTILITY OPTION: RE-INDEX FILE
MODIFY WHAT FILE: KERNEL SYSTEM PARAMETERS// 8994.1 RPC BROKER SITE PARAMETERS
(1 entry)
THERE ARE 5 INDICES WITHIN THIS FILE
DO YOU WISH TO RE-CROSS-REFERENCE ONE PARTICULAR INDEX? No// (No)
OK, ARE YOU SURE YOU WANT TO KILL OFF THE EXISTING 5 INDICES? No// Y (Yes)
DO YOU THEN WANT TO 'RE-CROSS-REFERENCE'? Yes// (Yes)
...SORRY, LET ME PUT YOU ON 'HOLD' FOR A SECOND...
FILE WILL NOW BE 'RE-CROSS-REFERENCED'......
Select UTILITY OPTION:
Select OPTION: 1
ENTER OR EDIT FILE ENTRIES
INPUT TO WHAT FILE: RPC BROKER SITE PARAMETERS// 14.5 VOLUME SET
(1 entry)
EDIT WHICH FIELD: ALL//
Select VOLUME SET: ??
VISTA
You may enter a new VOLUME SET, if you wish
Answer should be the name of a volume set.
When each cpu can have only one volume set, this is also the cpu name.
Answer will be used in extended global references to reach this volume.
Select VOLUME SET: VISTA
VOLUME SET: VISTA//
TYPE: GENERAL PURPOSE VOLUME SET//
INHIBIT LOGONS?: NO//
LINK ACCESS?: YES//
OUT OF SERVICE?: NO//
REQUIRED VOLUME SET?: NO//
TASKMAN FILES UCI: VISTA//
TASKMAN FILES VOLUME SET: VISTA//
REPLACEMENT VOLUME SET:
DAYS TO KEEP OLD TASKS: 4//
SIGNON/PRODUCTION VOLUME SET: Yes//
Select VOLUME SET:
Select OPTION: 1 ENTER OR EDIT FILE ENTRIES
INPUT TO WHAT FILE: VOLUME SET// 14.7 TASKMAN SITE PARAMETERS
(2 entries)
EDIT WHICH FIELD: ALL//
Select TASKMAN SITE PARAMETERS BOX-VOLUME PAIR: ?
Answer with TASKMAN SITE PARAMETERS BOX-VOLUME PAIR
Choose from:
VISTA:NTA
VISTA:NTB
You may enter a new TASKMAN SITE PARAMETERS, if you wish
Answer must be 3-30 characters in length.
The value for the current account is VISTA:CACHE
Select TASKMAN SITE PARAMETERS BOX-VOLUME PAIR: VISTA:CACHE
Are you adding 'VISTA:CACHE' as
a new TASKMAN SITE PARAMETERS (the 3RD)? No// YES (Yes)
RESERVED:
LOG TASKS?: NO NO
DEFAULT TASK PRIORITY:
TASK PARTITION SIZE: ?
Enter the number of KB (10-999) to set maximum partition size to.
TASK PARTITION SIZE:
SUBMANAGER RETENTION TIME: 0
TASKMAN JOB LIMIT: 20
TASKMAN HANG BETWEEN NEW JOBS: 1
MODE OF TASKMAN: ?
This is a required field.
Enter '??' for more help.
Choose from:
G GENERAL PROCESSOR
P PRINT SERVER
C COMPUTE SERVER
O OTHER NON-TASKMAN
MODE OF TASKMAN: G GENERAL PROCESSOR
VAX DSM ENVIROMENT FOR DCL:
OUT OF SERVICE: N NO
MIN SUBMANAGER CNT:
TM MASTER: ?
Answer with TASKMAN SITE PARAMETERS BOX-VOLUME PAIR
Choose from:
VISTA:CACHE
VISTA:NTA
VISTA:NTB
TM MASTER: VISTA:CACHE
Balance Interval: ?
Type a number between 10 and 120, 0 Decimal Digits
Balance Interval:
LOAD BALANCE ROUTINE:
Auto Delete Tasks:
Manager Startup Delay:
Select TASKMAN SITE PARAMETERS BOX-VOLUME PAIR: ?
Answer with TASKMAN SITE PARAMETERS BOX-VOLUME PAIR
Choose from:
VISTA:CACHE
VISTA:NTA
VISTA:NTB
You may enter a new TASKMAN SITE PARAMETERS, if you wish
Answer must be 3-30 characters in length.
The value for the current account is VISTA:CACHE
Select TASKMAN SITE PARAMETERS BOX-VOLUME PAIR: VISTA:CACHE
BOX-VOLUME PAIR: VISTA:CACHE//
RESERVED: ^
Select TASKMAN SITE PARAMETERS BOX-VOLUME PAIR:
Select OPTION: 1 ENTER OR EDIT FILE ENTRIES
INPUT TO WHAT FILE: TASKMAN SITE PARAMETERS// 8994.1 RPC BROKER SITE PARAMETERS
(1 entry)
EDIT WHICH FIELD: ALL//
Select RPC BROKER SITE PARAMETERS DOMAIN NAME: VISTA.MYDOMAIN.COM
...OK? Yes// YES (Yes)
DOMAIN NAME: VISTA.MYDOMAIN.COM//
Select BOX-VOLUME PAIR: VISTA:NTA// VISTA:CACHE
Are you adding 'VISTA:CACHE' as a new LISTENER (the 2ND for this RPC BROKER SITE PARAMETERS)? No// YES
(Yes)
Select PORT: 9210
Are you adding '9210' as a new PORT (the 1ST for this LISTENER)? No// YES (Yes)
*UCI:
STATUS: STOPPED//
CONTROLLED BY LISTENER STARTER: NO NO
Select RPC BROKER SITE PARAMETERS DOMAIN NAME:
Select OPTION:
VISTA>W "STEP 49"
STEP 49
VISTA>
VISTA>DO Q^DI
VA FileMan 22.0
Select OPTION: 1 ENTER OR EDIT FILE ENTRIES
INPUT TO WHAT FILE: RPC BROKER SITE PARAMETERS// 200 NEW PERSON
(9 entries)
EDIT WHICH FIELD: ALL// .01 NAME
THEN EDIT FIELD: ACCESS CODE Want to edit ACCESS CODE (Y/N)
THEN EDIT FIELD:
Select NEW PERSON NAME: MANAGER,SYSTEM
Are you adding 'MANAGER,SYSTEM' as a new NEW PERSON (the 10TH)? No// YES (Yes)
Checking SOUNDEX for matches.
No matches found.
NEW PERSON INITIAL: SM
NEW PERSON MAIL CODE:
Want to edit ACCESS CODE (Y/N): YES
Enter a new ACCESS CODE : *******
Please re-type the new code to show that I have it right: *******
OK, Access code has been changed!
The VERIFY CODE has been deleted as a security measure.
The user will have to enter a new one the next time they sign-on.
Select NEW PERSON NAME:
Select OPTION: 5 INQUIRE TO FILE ENTRIES
OUTPUT FROM WHAT FILE: NEW PERSON//
Select NEW PERSON NAME: MANAGER,SYSTEM SM
ANOTHER ONE:
STANDARD CAPTIONED OUTPUT? Yes// (Yes)
Include COMPUTED fields: (N/Y/R/B): NO// BOTH Computed Fields and Record Number (IEN)
NUMBER: 8 NAME: MANAGER,SYSTEM
INITIAL: SM ACCESS CODE:
DATE ENTERED: APR 05, 2005 CREATOR: 0
Entry Last Edit Date: APR 05, 2005 NAME COMPONENTS: 200
SIGNATURE BLOCK PRINTED NAME: SYSTEM MANAGER
DATE ACCESS CODE LAST CHANGED (c): APR 5,2005
PROVIDER KEY (c): 0
Select NEW PERSON NAME:
Select OPTION:
VISTA>W "STEP 70"
STEP 70
VISTA>
VISTA>SET DUZ=8
VISTA>SET $PIECE(^VA(200,DUZ,0),"^",4)="@"
VISTA>D ^XUP
Setting up programmer environment
Select TERMINAL TYPE NAME: C-VT100
1 C-VT100 Digital Equipment Corporation VT-100 video
2 C-VT100HIGH Normal display of characters in BOLD !
CHOOSE 1-2: 1 C-VT100 Digital Equipment Corporation VT-100 video
Terminal Type set to: C-VT100
Select OPTION NAME: XUMAINT Menu Management
Select Menu Management Option: KEY Management
Select Key Management Option: ALLOcation of Security Keys
Allocate key: XUPROG
1 XUPROG
2 XUPROGMODE
CHOOSE 1-2: 1 XUPROG
Another key: XUPORGMODE ??
Another key: XUPROGMODE
Another key: XMMGR
Another key: XUMGR
Another key:
Holder of key: MANAGER,SYSTEM SM
Another holder:
You've selected the following keys:
XUPROG XUMGR XUPROGMODE XMMGR
You've selected the following holders:
MANAGER,SYSTEM
You are allocating keys. Do you wish to proceed? YES//
XUPROG being assigned to:
MANAGER,SYSTEM
XUMGR being assigned to:
MANAGER,SYSTEM
XUPROGMODE being assigned to:
MANAGER,SYSTEM
XMMGR being assigned to:
MANAGER,SYSTEM
Select Key Management Option:
Select Menu Management Option:
Do you really want to halt? YES//
Halting at 7:50 am
VISTA>
VISTA>W "STEP 78"
STEP 78
VISTA>SET XUMF=1 DO Q^DI
VA FileMan 22.0
Select OPTION: 1 ENTER OR EDIT FILE ENTRIES
INPUT TO WHAT FILE: 4 INSTITUTION (66 entries)
EDIT WHICH FIELD: ALL// STATION NUMBER
THEN EDIT FIELD:
Select INSTITUTION NAME: VISTA HEALTH CARE
Are you adding 'VISTA HEALTH CARE' as a new INSTITUTION (the 67TH)? No// YES
(Yes)
STATION NUMBER: 6100
Select INSTITUTION NAME:
Select OPTION: 1 ENTER OR EDIT FILE ENTRIES
INPUT TO WHAT FILE: INSTITUTION// 40.8 MEDICAL CENTER DIVISION
(1 entry)
EDIT WHICH FIELD: ALL// FACILITY NUMBER
THEN EDIT FIELD: INSTITUTION FILE POINTER
THEN EDIT FIELD:
Select MEDICAL CENTER DIVISION NAME: VISTA MEDICAL CENTER
Are you adding 'VISTA MEDICAL CENTER' as
a new MEDICAL CENTER DIVISION (the 2ND)? No// YES (Yes)
MEDICAL CENTER DIVISION NUM: 2//
MEDICAL CENTER DIVISION FACILITY NUMBER: 6100A
FACILITY NUMBER: 6100A//
INSTITUTION FILE POINTER: VISTA HEALTH CARE 6100
Select MEDICAL CENTER DIVISION NAME:
Select OPTION:
VISTA>
VISTA>W "STEP 81"
STEP 81
VISTA>
VISTA>DO ^XUP
Setting up programmer environment
Terminal Type set to: C-VT100
Select OPTION NAME: XUSEREDIT
1 XUSEREDIT Edit an Existing User
2 XUSEREDITSELF Edit User Characteristics
CHOOSE 1-2: 1 XUSEREDIT Edit an Existing User
Edit an Existing User
the log was too much to edit for this portion. I did follow the instructions as shown in the Install documentation
VISTA>
VISTA>
VISTA>
VISTA>
VISTA>D ^XUP
Setting up programmer environment
Terminal Type set to: C-VT100
Select OPTION NAME: XUSERED
1 XUSEREDIT Edit an Existing User
2 XUSEREDITSELF Edit User Characteristics
CHOOSE 1-2: 1 XUSEREDIT Edit an Existing User
Edit an Existing User
Select NEW PERSON NAME: MANAGER,SYSTEM SM
Screenman does not log well, the log was too much to edit for this portion. I did follow the instructions as shown in the Install documentation
VISTA>
VISTA>
VISTA>W "STEP 86"
STEP 86
VISTA>
VISTA>DO ^XUP
Setting up programmer environment
Terminal Type set to: C-VT100
Select OPTION NAME: XUMAINT Menu Management
Select Menu Management Option: EDit options
Select OPTION to edit: EVE
1 EVE Systems Manager Menu
2 EVENT CAPTURE (ECS) EXTRACT AU ECX ECS SOURCE AUDIT Event Capture
(ECS) Extract Audit
3 EVENT CAPTURE DATA ENTRY ECENTER Event Capture Data Entry
4 EVENT CAPTURE EXTRACT ECXEC Event Capture Extract
5 EVENT CAPTURE MANAGEMENT MENU ECMGR Event Capture Management Menu
Press to see more, '^' to exit this list, OR
CHOOSE 1-5: 1 EVE Systems Manager Menu
NAME: EVE// ^10 MENU
Select ITEM: HL MAIN MENU// DIUSER VA FileMan
Are you adding 'DIUSER' as a new MENU (the 13TH for this OPTION)? No// YES
(Yes)
MENU SYNONYM: FM
SYNONYM: FM//
DISPLAY ORDER:
Select ITEM: XMMGR
1 XMMGR Manage Mailman
2 XMMGR-BACKGROUND-FILER Background Filer (XMAD)
3 XMMGR-BKFILER-ACT Active Users/Deliveries Report
4 XMMGR-BKFILER-EDIT-NORMALIZED Edit numbers to Normalize Reports
5 XMMGR-BKFILER-GROUP Deliveries by Group
Press to see more, '^' to exit this list, OR
CHOOSE 1-5: 1 XMMGR Manage Mailman
Are you adding 'XMMGR' as a new MENU (the 14TH for this OPTION)? No// YES (Yes)
MENU SYNONYM:
SYNONYM:
DISPLAY ORDER:
Select ITEM:
CREATOR: SCHLEHUBER,CAMERON// MANAGER,SYSTEM SM
HELP FRAME: ^
Select OPTION to edit: XUCOMMAND SYSTEM COMMAND OPTIONS
NAME: XUCOMMAND// ^10 MENU
Select ITEM: XQALERT// XMUSER MailMan Menu
Are you adding 'XMUSER' as a new MENU (the 8TH for this OPTION)? No// YES (Yes)
MENU SYNONYM: MM
DISPLAY ORDER:
Select ITEM:
CREATOR: SCHLEHUBER,CAMERON// MANAGER,SYSTEM SM
HELP FRAME: ^
Select OPTION to edit:
Select Menu Management Option:
Do you really want to halt? YES//
Halting at 8:05 am
VISTA>
VISTA>W "STEP 91"
STEP 91
VISTA>D ^ZU
Volume set: VISTA:CACHE UCI: VISTA Device: |TRM|:|208 (TRM:)
ACCESS CODE: *******
VERIFY CODE:
Good morning Boss
You last signed on today at 08:02
You must change your VERIFY CODE at this time.
Enter a new VERIFY CODE: ************
Please re-type the new code to show that I have it right: ************
OK, Verify code has been changed!
[c
Select TERMINAL TYPE NAME: C-VT100//
Digital Equipment Corporation VT-100 video
WARNING -- TASK MANAGER DOESN'T SEEM TO BE RUNNING!!!!
Select Systems Manager Menu Option: OPERations Management
Select Operations Management Option: KERnel Management Menu
Select Kernel Management Menu Option: ENTer/Edit Kernel Site Parameters
Note: the TaskMan site parameters have been moved out of this file.
Use the Edit TaskMan Parameters option to edit those values.
removed screen man data from log, it was horribly mangled, and the pay back for taking the time to convert from VT-100 commands to html did not seem like it was worth it.
Select Kernel Management Menu Option:
Select Operations Management Option:
Select Systems Manager Menu Option:
Do you really want to halt? YES//
Halting at 8:09 am
But, as I recall...
You've changed your VERIFY CODE during this session.
Please remember it for next time.
<Session disconnected>
This concludes the log from step 32 through step 96. See Update VistA devices for Linux, or
From step 97 on Windows